To begin select the correct platform ( iOS / Android ) using the switch at the top.

Next the remote needs to be put into pairing mode, This is done by holding down both buttons on the front of the device.
You will need to hold the buttons until the green light comes on and begins to blink.

Once the remote is in pairing mode you can go to your devices Bluetooth settings and select the device "remote helper".

On successful connection the device will now say connected next to the "remote helper" in your Bluetooth settings.  

Once in the VideoMyJob App record screen, press the camera button on the dongle once to begin, and then press the same button again to stop recording.

When you are finished with the Bluetooth remote remember to switch it to the off position to avoid draining its battery. 

Did this answer your question?